Avionté supports merging Talent records for both integrated and non-integrated clients. Merging combines two or more profiles for the same person into one record. You choose one profile to keep, and everything from the profile or profiles you merge away moves into it.
Not sure which profiles are duplicates in the first place? The Duplicate Talent Report surfaces likely duplicate talent records across your database. It flags candidates for merging but doesn't perform the merge itself — use the steps below once you've found a duplicate pair.
Merges performed in AviontéBOLD are automatically reflected in the Back Office, including payroll and tax data that lives only there. You never need to repeat a merge in both systems.
Before You Merge
- Access. Merging requires Applicant Tracking access granted by your Avionté Administrator. If you don’t see the merge option, ask your admin to grant it.
- Up to 10 profiles at a time. You can merge as many as 10 profiles into one in a single operation. If any profile in the set fails a check below, the whole merge is rejected and nothing changes for any profile involved.
- Open I-9 or E-Verify cases block the merge. If any profile has an Equifax I-9 still in progress, or an open Equifax E-Verify case, the merge is blocked until that’s resolved or archived in Equifax. Merge before sending I-9 paperwork, or after it’s fully complete, to avoid this. Archiving or cancelling the in-progress I-9 in Equifax doesn’t always clear this block right away — if you still can’t merge after doing that, contact Avionté Support instead of repeatedly retrying; they can confirm the I-9 status on both profiles and clear the block correctly.
- Division match, when back-office integration is enabled. If your account has the Avionté Back Office integration claim enabled, every profile in the merge, both the one you keep and each one you’re merging away, must belong to the same office division. If any profile has no division set, or the divisions don’t match, the merge is blocked before anything is written.
- Placements decide which profile you can keep. If one of the profiles has a placement, the interface forces you to keep that one. To keep a different profile instead, add a placement to it first.
- Confirm the profile you keep already has the identifying details you need. A merge doesn’t pull core identifying information like a Social Security Number or date of birth from a merged-away profile onto the one you keep — if the profile you choose as the kept profile is missing one, it stays missing afterward. This matters most for an active employee mid-assignment, since payroll can’t process a paycheck without an SSN on file. Check which profile already has the correct information before you confirm which one to keep, rather than relying on the merge to combine it for you.
How to Merge a Record
Merge existing records
- From the Applicant/Talent Tracking page, search for the person who has multiple profiles.
- Check the boxes to the left of their names.
- Scroll to the bottom and select Mass Actions, then Merge Talent.
- Select the profile you want to keep as the Master Profile. The Merge button won’t appear until you select one.
- Click Merge.
- Click Finished once you see the confirmation that the records have been merged.
Merge a new record with an existing record
- Enter the information for a new Talent record.
- If the system finds a possible duplicate, you’ll see a prompt with three options:
- Cancel stops the new record from being created.
- Merge merges the new record into the existing one you select.
- Import ignores the possible duplicate and creates the new record anyway.
- To merge, select the existing record and click Merge. The button won’t appear until you select a record.
- Choose what to merge (usually everything) and click Merge again.
- You land on the existing (kept) profile. The profile you merged away no longer appears in BOLD, and shows a status of "deleted" in the Back Office.
Merging also clears the SSN on the profile you merge away right away, so you can update fields like date of birth or gender on the profile you keep without hitting a duplicate-data error.
Confirm a merge happened
- Go to the kept (Master) Profile and click the Activities tab.
- Look for the Merged Applicant message.
What Happens to the Profile You Keep
- Core contact and biographical info stays as-is. Name, address, email, phone, and date of birth on the kept profile are never changed by a merge, no matter what the merged-away profiles contain.
- Basic tax fields fill in only if blank. Dependents, exempt status, region worked, additional withholding amount, and the electronic consent flags for W-2, 1095-C, and 1099 are filled in from a merged-away profile only if the kept profile’s own value was blank. If the kept profile already had a value, it’s left alone.
- E-Verify case is the one exception. If a merged-away profile’s E-Verify case is more recent than the one on the kept profile, that more recent case number and date replace what was there. This is the only field on the kept profile a merge can overwrite rather than just fill in.
- Pay card accounts are added if new. A pay card account, such as a CHANGE card, from a merged-away profile is copied to the kept profile only if that exact account number isn’t already there. The copy has its amount type and percentage reset, so double-check those settings after the merge.
- Skills, tags, certifications, sources, and citizenship combine. These are merged into one list on the kept profile with no duplicates created.
- History and records move over completely. Resumes and uploaded documents, education history, job history, activity feed entries, career-site applications, placements, onboarding tasks and state tax forms submitted during onboarding, e-signature documents, and referral records all move to the kept profile. Nothing is lost, it now lives under the kept profile instead. If the same onboarding task existed on both profiles, it isn’t de-duplicated, so you may see it twice on the kept profile after the merge.
- Timesheet approver duties transfer too. If a profile you merge away had pending timesheet approvals, or was itself set up to approve other people’s timesheets, that responsibility moves to the user account linked to the profile you keep.
- A summary note is added to the Activities tab. For every profile you merge away, the note records that profile’s ID, name, assigned rep, created-on date, address, and contact info exactly as it stood at the moment of the merge. Today, this note is the only visible trace of a merge on the kept profile itself.
- Paychecks and pay details move over. Paychecks, along with their accrual, benefit, deduction, and tax lines, and any pay corrections, move to the kept profile. Where the kept profile already has the same setup, such as the same accrual plan, the paycheck lines link to that existing setup instead of creating a second copy.
- Accrual balances move over, unless one already exists. PTO, vacation, and sick time balances move to the kept profile, unless it already has a balance for that same plan. When it does, the merged-away profile’s balance is left as-is rather than combined.
- Benefit enrollments move over, unless already enrolled. A benefit enrollment moves to the kept profile unless it’s already enrolled in that same benefit.
- Payroll deductions move over, unless a matching one exists. A deduction moves to the kept profile unless a matching deduction is already there.
- Tax withholding and W-4 records move over, unless one’s already on file. State tax records and federal W-4 records move over, unless the kept profile already has one on file for that same tax or staffing supplier.
- Unemployment and workers’ compensation claims move over. Both move to the kept profile.
- Transaction history moves over. Pay-period transaction records are relabeled with the kept profile’s name and moved to it.
If something interrupts a merge partway through, none of the changes are applied. You won’t end up with some records moved and others not.
What Happens to the Profiles You Merge Away
- The profile is never deleted. It stays in the system permanently as an archived record, in case you ever need to look it up.
- It’s flagged as archived, with a record of when the merge happened and who performed it.
- Its Social Security Number is cleared permanently. This happens every time a profile is merged away, with no exceptions, and it can’t be recovered afterward by any means.
- Everything else stays frozen as a historical snapshot. Name, address, and contact info remain on the record exactly as they were. The profile just no longer represents an active person.
- Its Talent Portal login is deactivated, not deleted. The person can no longer sign in under that identity, but the account record itself isn’t removed.
Signals for Connected Systems
If you maintain your own copy of Avionté talent data, for example in an external HR or ATS system, a merge sends a signal your integration can use to stay in sync.
- A signal fires once for each profile you merge away, identifying which profile survived and which one was merged into it.
- The signal only confirms that a merge happened. It doesn’t include a field-by-field list of what changed.
- Because of that, treat the signal as a cue to re-fetch the surviving profile’s current state through your normal integration, not as a change log by itself.
- A general "talent saved" event may also fire for both the profile you keep and each profile you merge away. If your integration already reacts to that event elsewhere, know that a merge can trigger it too, not just a normal edit.
- Confirm with your Avionté representative that this signal is available for your integration before you build against it.
Can a Merge Be Undone?
No. A merge is permanent once it’s confirmed. The cleared Social Security Number cannot be restored.
If you need a merged-away profile visible again, for example because it was merged by mistake, you can restore its visibility using Recover Record Archives. Restoring visibility is not the same as reversing the merge: documents and history that moved to the kept profile stay there, and the SSN that was cleared stays cleared.
- Go to Account & Settings.
- Click Utilities.
- Click the Record Archive tile.
- Find the record you’re looking for and click Restore to make it visible in the front office again.
Preventing Future Duplicates
- Enable duplicate-check hard stops on your career page. Configuring your Career Page’s duplicate-check setting to a hard stop prevents a new application from silently overwriting an existing profile when the contact information matches, which otherwise creates the kind of mismatched record that needs a merge later. See Career Page Restrictive Duplicate Checking and the Application Hard Stop Option for how to configure it.
- Use unique contact information per applicant. When multiple applicants share an email address or phone number, the system can update an existing profile instead of creating a new one for the new applicant. Confirming unique contact details at the time of application helps avoid this.
- Address duplicates at the Contact level, not just the user level. Inactivating a user account doesn’t update the associated Contact record, so a duplicate Contact can persist even after the related user is inactivated. Resolve duplicates on the Contact record directly.
Comments
0 commentsPlease sign in to leave a comment.